Of key-press of face plate of operation of MDI of machine tool of FANUC system numerical control define
- Time:
- Click:111
- source:SHERBURNE CNC Machining
J.
Start of K circular arc is apart from to circular arc center (be in respectively X, y, on Z axis) subprogram of 31 P calls program of code 32 PROGRAM PROTECT to remember 33 MEMORY of protective switch to carry out program 34 EDIT automatically to edit 35 MDI the hand moves simple sentence of editor 36 SINGL BLOCK to carry out 37 BLOCK DELET to appoint do not execute simple sentence order (with / key is shared) 38 OPT STOP.
S.
T.
41 CYCLE START of yard statement is moved circularly (executive program) 42 CYCLE STOP stops circularly (suspensive process) program of 43 PRG STOP stops (share with M00) 44 HOME returns X.
Y.
Z.
Each axis is mechanical former&45 JOG hand of #59843; moves feed (all right or cutting) 46 MPG hand moves hand of driver 50 HIGH to move main shaft of 51 SPDL DEC of fast feed (main shaft of rotational 54 SPDL STOP stops suitable clock of main shaft of 53 SPDL CW of fast of instruction of the S in executive program of 52 SPDL 100% of RPM) fast , y+ , x of X+ machine tool.
Y.
Z.
The axis is gone to square to mobile 58 Z- , y- , x of X- machine tool.
Y.
Z.
The axis moves toward negative direction 59 4- , 4+ machine tools 60 TRVRS carries out four-axle 61 CLNT ON of of instruction of each axis shift supplies the machine tool 62 CLNT OFF of cutting fluid stops to supply 63 CLNT AUTO of cutting fluid to be carried out automatically supply speed of cutting of 64 OVERRIDE of cutting fluid to follow accuse 0- - is 65 EMERGENCY STOP of 150% urgent stop overheat of bear of main shaft of 66 THERMAL ALARM to call the police does inadequacy of lube of 67 LUB ALARM call the police quick stroke of 70 RAPID OVERRIDE of of function of treatment of mirror of axis of 69 Y_MIRROR IMAGE Y of of function of treatment of mirror of axis of 68 X_MIRROR IMAGE X? Charge direct numerical control of 71 DNC: As a result of exterior interface equipment input program comes numerical control machine tool, and factor accuses machine tool itself to remember a capacity finite, need carries out an edge to read an edge to do (carry out collection process and) of action of executive order injunction at the same time namely, call DNC operation. After the DNC that finish is operated, memory of numerical control machine tool is nonexistent, by the program that DNC inputs. Process designing of setting of 72 BACKGROUD EDIT: (BG-EDIT) is carried out when numerical control machine tool automatic (when AUTO) is machined, can be inputted at the same time or write another program, and do not need to make fun of secure. Hand of 73 MANU ABS moves recrudesce of program of 74 PROG RSTAT of absolute value to move 75 Z NEGLT to cancel to carry out Z axis to dictate 76 AXIS LOCK cancels to carry out 3 axes to dictate CNC Milling CNC Machining