Water the characteristic of fluidics

  • Time:
  • Click:132
  • source:SHERBURNE CNC Machining
The traditional cut photograph such as cut of water efflux cut and laser, plasma, line is compared, have following advantages: - - cut quality is superior: Water efflux is means of a kind of cold working, "Water knife " do not wear away and radius is very small, can machine the roundlet arc that has acute cincture outline. Treatment itself arises without quantity of heat and treatment force is small, treatment surface won't appear hot influence area, natural cut is in the constituent structure of material not to produce change, put in mechanical stress and meet an emergency scarcely, cut aperture (pure water cut is about 0.

1mm comes 1.

1mm, cut of arenaceous water mixed flow is about 0.

8mm comes 1.

8mm. As the diametical enlarge mouth of arenaceous knife, its cut is bigger also) reach cut bevel edge is very small (the cut that has seen for the most part tastes odd skew edge for 0.

076mm comes 0.

Between 102mm) , need not fabricating, without the interstitial, edge that do not have wool, without dross, cut quality is accordingly good. - - the restriction that has material and ply hardly: No matter be a metal kind wait like common armor plate, stainless steel, copper, titanium, aluminium alloy, or it is metalloid kind of material that be like stone, pottery and porcelain, glass, balata, paper and composite material, all applicably. - - managing cost: Generation of water cut place is transverse reach fore-and-aft active force minimum, won't produce fuel factor or be out of shape or subtle break, do not need fabricating, already but cut of bore Yi Ke, reduced cut time to reach production cost. - - free from contamination of clean environmental protection: Do not produce arc, dirt and toxic gas in cut process, operation environment is neat, accord with environmental protection requirement. CNC Milling CNC Machining