How does high speed wire realize much angle to measure?
- Time:
- Click:214
- source:SHERBURNE CNC Machining
1, the tall line that quadruplet measures the graph on the head to measure a composition for quadruplet measures diameter appearance, can measure the external diameter size on 4 direction with high speed same and sectional wire, can detect an ovality information. Be high accuracy is online detect equipment. Commonly used use at spot of steel rolling rolling. The graph measures one of diameter appearance for 4 namely on, the line means measure that provides labour to accuse engine system to realize high accuracy detects, provide software system, can show each information that craft place wants in detail, have data to be measured in real time show, the function such as data analysis, can undertake out of tolerance calls the police. 2.
2, 8 groups measure the graph on the head to measure the tall line of a composition to measure diameter appearance for 8 groups, this kind of appearance that measure way is measurable the line means dimension on 8 direction with high speed same and sectional wire, it is to be able to be achieved all-around detected equipment. 3, 8 groups measure a head all-around detect tall line measures the advantage that this plants diameter appearance to resemble measuring a principle is with extremely tall film speed obtains outline to drip clear while quarter, with sectional dimension. By 8 groups of be apart 22.
Measure unit basically of 5 ° to discharge cloth to be able to measure the same and sectional outline size of the content that be measured quickly on same plane. This kind is measured 16 edges form is cut to approach complete circle outside forming sectional, it is current can get what cut size of same and sectional outline temporarily together exclusively to measure equipment truly. 8 groups of data that measure a head to measure oneself is adjacent a complete sectional appearance, area of across of two bundles of lights is not sensitive area (either do not measure, however not sensitive, although sensitive least of all dot -- 11.
Of 25 ° raised 0 what should be more than a diameter only.
98% , can measure) , measure an error very small also. The actual condition of product line is the roll that the content that be measured always has proper point of view, the content that be measured wants radial roll to be more than only 5% 0 what measure an error to be a diameter.
3% the following. So, this kind of measurement technique does not have " of " blind area not only, the measurement of raised blemish the error is the biggest 0 what also do not exceed a diameter.
98% , do not exceed 0 diametical commonly.
3% . It be the same as sectional high speed measurement technique in order to be the same as hour, measuring the data bulk that gets sectional figure is to rotate 100 times of measurement technique, it is to swing of measurement technique (2000~6000) times. The appearance measuring way that epilogue measures the appearance measuring way of the head and quadruplet 8 groups to measure a head all detects for commonly used line means equipment, can undertake metrical according to demand, 8 groups of data point of view that measure an appearance that measure way to detect are more overall. The use that much angle tall line measures diameter appearance is quality of product of factory of high speed wire to rise have very good effect, and also be resource conservation, reduced manufacturing cost to rise to promote action. The article is measured by Baoding city La Peng accuse limited company of science and technology to write CNC Milling CNC Machining